Go to the first, previous, next, last section, table of contents.


Troubleshooting

If you are having trouble with CVS, this appendix may help. If there is a particular error message which you are seeing, then you can look up the message alphabetically. If not, you can look through the section on other problems to see if your problem is mentioned there.

Partial list of error messages

Here is a partial list of error messages that you may see from CVS. It is not a complete list---CVS is capable of printing many, many error messages, often with parts of them supplied by the operating system, but the intention is to list the common and/or potentially confusing error messages.

The messages are alphabetical, but introductory text such as `cvs update: ' is not considered in ordering them.

In some cases the list includes messages printed by old versions of CVS (partly because users may not be sure which version of CVS they are using at any particular moment).

cvs command: authorization failed: server host rejected access
This is a generic response when trying to connect to a pserver server which chooses not to provide a specific reason for denying authorization. Check that the username and password specified are correct and that the CVSROOT specified is allowed by --allow-root in inetd.conf. See section Direct connection with password authentication.
file:line: Assertion 'text' failed
The exact format of this message may vary depending on your system. It indicates a bug in CVS, which can be handled as described in section Dealing with bugs in CVS or this manual.
cvs command: conflict: removed file was modified by second party
This message indicates that you removed a file, and someone else modified it. To resolve the conflict, first run `cvs add file'. If desired, look at the other party's modification to decide whether you still want to remove it. If you don't want to remove it, stop here. If you do want to remove it, proceed with `cvs remove file' and commit your removal.
cannot change permissions on temporary directory
Operation not permitted
This message has been happening in a non-reproducible, occasional way when we run the client/server testsuite, both on Red Hat Linux 3.0.3 and 4.1. We haven't been able to figure out what causes it, nor is it known whether it is specific to linux (or even to this particular machine!). If the problem does occur on other unices, `Operation not permitted' would be likely to read `Not owner' or whatever the system in question uses for the unix EPERM error. If you have any information to add, please let us know as described in section Dealing with bugs in CVS or this manual. If you experience this error while using CVS, retrying the operation which produced it should work fine.
cannot open CVS/Entries for reading: No such file or directory
This generally indicates a CVS internal error, and can be handled as with other CVS bugs (see section Dealing with bugs in CVS or this manual). Usually there is a workaround--the exact nature of which would depend on the situation but which hopefully could be figured out.
cvs [init aborted]: cannot open CVS/Root: No such file or directory
This message is harmless. Provided it is not accompanied by other errors, the operation has completed successfully. This message should not occur with current versions of CVS, but it is documented here for the benefit of CVS 1.9 and older.
cvs [checkout aborted]: cannot rename file file to CVS/,,file: Invalid argument
This message has been reported as intermittently happening with CVS 1.9 on Solaris 2.5. The cause is unknown; if you know more about what causes it, let us know as described in section Dealing with bugs in CVS or this manual.
cvs [command aborted]: cannot start server via rcmd
This, unfortunately, is a rather nonspecific error message which CVS 1.9 will print if you are running the CVS client and it is having trouble connecting to the server. Current versions of CVS should print a much more specific error message. If you get this message when you didn't mean to run the client at all, you probably forgot to specify :local:, as described in section The Repository.
ci: file,v: bad diff output line: Binary files - and /tmp/T2a22651 differ
CVS 1.9 and older will print this message when trying to check in a binary file if RCS is not correctly installed. Re-read the instructions that came with your RCS distribution and the INSTALL file in the CVS distribution. Alternately, upgrade to a current version of CVS, which checks in files itself rather than via RCS.
cvs checkout: could not check out file
With CVS 1.9, this can mean that the co program (part of RCS) returned a failure. It should be preceded by another error message, however it has been observed without another error message and the cause is not well-understood. With the current version of CVS, which does not run co, if this message occurs without another error message, it is definitely a CVS bug (see section Dealing with bugs in CVS or this manual).
cvs [login aborted]: could not find out home directory
This means that you need to set the environment variables that CVS uses to locate your home directory. See the discussion of HOME, HOMEDRIVE, and HOMEPATH in section All environment variables which affect CVS.
cvs update: could not merge revision rev of file: No such file or directory
CVS 1.9 and older will print this message if there was a problem finding the rcsmerge program. Make sure that it is in your PATH, or upgrade to a current version of CVS, which does not require an external rcsmerge program.
cvs [update aborted]: could not patch file: No such file or directory
This means that there was a problem finding the patch program. Make sure that it is in your PATH. Note that despite appearances the message is not referring to whether it can find file. If both the client and the server are running a current version of CVS, then there is no need for an external patch program and you should not see this message. But if either client or server is running CVS 1.9, then you need patch.
cvs update: could not patch file; will refetch
This means that for whatever reason the client was unable to apply a patch that the server sent. The message is nothing to be concerned about, because inability to apply the patch only slows things down and has no effect on what CVS does.
dying gasps from server unexpected
There is a known bug in the server for CVS 1.9.18 and older which can cause this. For me, this was reproducible if I used the `-t' global option. It was fixed by Andy Piper's 14 Nov 1997 change to src/filesubr.c, if anyone is curious. If you see the message, you probably can just retry the operation which failed, or if you have discovered information concerning its cause, please let us know as described in section Dealing with bugs in CVS or this manual.
end of file from server (consult above messages if any)
The most common cause for this message is if you are using an external rsh program and it exited with an error. In this case the rsh program should have printed a message, which will appear before the above message. For more information on setting up a CVS client and server, see section Remote repositories.
cvs commit: Executing 'mkmodules'
This means that your repository is set up for a version of CVS prior to CVS 1.8. When using CVS 1.8 or later, the above message will be preceded by
cvs commit: Rebuilding administrative file database
If you see both messages, the database is being rebuilt twice, which is unnecessary but harmless. If you wish to avoid the duplication, and you have no versions of CVS 1.7 or earlier in use, remove -i mkmodules every place it appears in your modules file. For more information on the modules file, see section The modules file.
missing author
Typically this can happen if you created an RCS file with your username set to empty. CVS will, bogusly, create an illegal RCS file with no value for the author field. The solution is to make sure your username is set to a non-empty value and re-create the RCS file.
*PANIC* administration files missing
This typically means that there is a directory named CVS but it does not contain the administrative files which CVS puts in a CVS directory. If the problem is that you created a CVS directory via some mechanism other than CVS, then the answer is simple, use a name other than CVS. If not, it indicates a CVS bug (see section Dealing with bugs in CVS or this manual).
rcs error: Unknown option: -x,v/
This message will be followed by a usage message for RCS. It means that you have an old version of RCS (probably supplied with your operating system). CVS only works with RCS version 5 and later.
cvs [server aborted]: received broken pipe signal
This message seems to be caused by a hard-to-track-down bug in CVS or the systems it runs on (we don't know--we haven't tracked it down yet!). It seems to happen only after a CVS command has completed, and you should be able to just ignore the message. However, if you have discovered information concerning its cause, please let us know as described in section Dealing with bugs in CVS or this manual.
Too many arguments!
This message is typically printed by the `log.pl' script which is in the `contrib' directory in the CVS source distribution. In some versions of CVS, `log.pl' has been part of the default CVS installation. The `log.pl' script gets called from the `loginfo' administrative file. Check that the arguments passed in `loginfo' match what your version of `log.pl' expects. In particular, the `log.pl' from CVS 1.3 and older expects the logfile as an argument whereas the `log.pl' from CVS 1.5 and newer expects the logfile to be specified with a `-f' option. Of course, if you don't need `log.pl' you can just comment it out of `loginfo'.
cvs commit: Up-to-date check failed for `file'
This means that someone else has committed a change to that file since the last time that you did a cvs update. So before proceeding with your cvs commit you need to cvs update. CVS will merge the changes that you made and the changes that the other person made. If it does not detect any conflicts it will report `M cacErrCodes.h' and you are ready to cvs commit. If it detects conflicts it will print a message saying so, will report `C cacErrCodes.h', and you need to manually resolve the conflict. For more details on this process see section Conflicts example.
Usage: diff3 [-exEX3 [-i | -m] [-L label1 -L label3]] file1 file2 file3
Only one of [exEX3] allowed
This indicates a problem with the installation of diff3 and rcsmerge. Specifically rcsmerge was compiled to look for GNU diff3, but it is finding unix diff3 instead. The exact text of the message will vary depending on the system. The simplest solution is to upgrade to a current version of CVS, which does not rely on external rcsmerge or diff3 programs.
warning: unrecognized response `text' from cvs server
If text contains a valid response (such as `ok') followed by an extra carriage return character (on many systems this will cause the second part of the message to overwrite the first part), then it probably means that you are using the `:ext:' access method with a version of rsh, such as most non-unix rsh versions, which does not by default provide a transparent data stream. In such cases you probably want to try `:server:' instead of `:ext:'. If text is something else, this may signify a problem with your CVS server. Double-check your installation against the instructions for setting up the CVS server.
cvs commit: warning: editor session failed
This means that the editor which CVS is using exits with a nonzero exit status. Some versions of vi will do this even when there was not a problem editing the file. If so, point the CVSEDITOR environment variable to a small script such as:
#!/bin/sh
vi $*
exit 0

Trouble making a connection to a CVS server

This section concerns what to do if you are having trouble making a connection to a CVS server. If you are running the CVS command line client running on Windows, first upgrade the client to CVS 1.9.12 or later. The error reporting in earlier versions provided much less information about what the problem was. If the client is non-Windows, CVS 1.9 should be fine.

If the error messages are not sufficient to track down the problem, the next steps depend largely on which access method you are using.

:ext:
Try running the rsh program from the command line. For example: "rsh servername cvs -v" should print CVS version information. If this doesn't work, you need to fix it before you can worry about CVS problems.
:server:
You don't need a command line rsh program to use this access method, but if you have an rsh program around, it may be useful as a debugging tool. Follow the directions given for :ext:.
:pserver:
One good debugging tool is to "telnet servername 2401". After connecting, send any text (for example "foo" followed by return). If CVS is working correctly, it will respond with
cvs [pserver aborted]: bad auth protocol start: foo
If this fails to work, then make sure inetd is working right. Change the invocation in inetd.conf to run the echo program instead of cvs. For example:
2401  stream  tcp  nowait  root /bin/echo echo hello
After making that change and instructing inetd to re-read its configuration file, "telnet servername 2401" should show you the text hello and then the server should close the connection. If this doesn't work, you need to fix it before you can worry about CVS problems. On AIX systems, the system will often have its own program trying to use port 2401. This is AIX's problem in the sense that port 2401 is registered for use with CVS. I hear that there is an AIX patch available to address this problem.

Other common problems

Here is a list of problems which do not fit into the above categories. They are in no particular order.


Go to the first, previous, next, last section, table of contents.